Our Pallet DesignThe head frame consists of three layers laminated together. The middle layer is rubber. Because of the small size of the printing area, we found that the head frame is very strong and has no need for a flange. We have also eliminated the spring-turnbuckle assembly. We lean the head frame 10 degrees past 90 to keep it from falling down. For finishing, there is no powder coating. We tumble the parts that can be tumbled, and use various sanders on the head frame. Everything is smooth and pretty!
This design has minimized manufacturing and assembly times considerably. It is something that we can make custom versions of very fast and cost effectively. These masks will cover almost every face mask being produced.
The Form Fitted Face Mask Pallet: Has a chin seam easement. You load by hooking the face mask in the back - and then pulling it towards you. The pallet size is 5.75" x 3.75"
The Flat Face Mask Pallet: Has no seam easement. You load by hooking the ear straps to the left and to the right. The pallet size is 5.75" x 3.25"
The Universal Face Mask Pallet: This is a small hold down used for small prints on either Flat or Form Fitted face masks. Print Area: 3" x 3"
Package Pricing for COMBO Mask Pallets:
It is in the printers best interest to have both or all of these pallets. It is probable that printers will have challenges sourcing face masks, or their customers will likely have different preferences. Therefore - we are offering the form fitted and flat pallets, or all face mask pallets as a set for 15% off of the original retail price.