Franmar D-Haze Remover Plus

Directions:

Do not get Haze Remover on the glued portion of the screen as it will remove glues and adhesives.

1. On a slightly damp screen, spray or pour a minimal amount onto screen haze/ghost image.
2. Scrub screen with a dedicated Biggee pad or nylon brush.
3. Repeat on back of screen image.
4. Rinse screen clean with pressured water or use a damp cloth to wipe both sides of screen.

Note: For best results, be sure to dehaze screens every time after reclaiming. Use a separate degreasing step after dehazing when working with high mesh counts (380 or more), halftones, and costly films.

Usage Tips:

• Use each time immediately after emulsion or stencil removal so ghost/haze will not set in the screen.
• Control amount by using a spray bottle and avoid frame edges as Haze remover will remove the glue holding the mesh to the frame.
• Use Franmar's Screen Degreaser to remove any residue