Hello Guest, Login / My Account

International Coatings 7041 Paramount White
simulated print - actual color may vary

International Coatings 7041 Paramount White

review
4
0
5
Your Price: $0.00
Free Shipping
Part Number:IC7041-

Choose Options

Size
Quart [+$49.81]
Gallon [+$110.71]
5 Gallon [+$503.22]






FEATURES 
  • 7041LF* Paramount Ultra Low Bleed (LB), Phthalate-Free (PF) White is a low-fusing, fast-flashing, low-tack, high pigment plastisol-based screen printing ink. 
  • 7041LF has a very creamy viscosity and is very easy to print. As a result, less pressure is needed to print 7041LF through the screen. 
  • 7041LF contains no bleaching agents and offers superior performance relative to other low bleed inks.

RECOMMENDED FABRICS 
Cotton/polyester blends and 100% polyester. Always test print fabric for possible dye migration before beginning a production run.

SCREEN MESH AND EMULSION
60-305 t/in or 24-120 t/cm Monofilament 
Use 110-305 t/cm or 43-120 t/cm Monofilament for underbasing 
Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.

SPOT FLASHING 
This product will spot dry, with very low after-flash tack, in 2 to 8 seconds depending on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should just be dry to the touch, with no lift off, but not be totally fused. Totally fusing the underprint white may cause inner coat adhesion problems with the inks printed on top of the white ink. Final fusing or curing should occur in the dryer.

4 Stars
Amazing White Ink - Low Bleed
When it comes to white plastisol based ink, International Coatings Paramount White is amazing! It was easy to print and had low bleed. It laid down nice and smooth and was relatively easy to work with.
Reviewed by:  from Charlotte, North Carolina. on 1/6/2014
4

Related Products