Hello Guest, Login / My Account

Rutland SXT Silicone Ink - Silver Toner
color on screen may vary from actual product

Rutland SXT Silicone Ink - Silver Toner

Your Price: $0.00
Part Number:RUT-SX0731-

Choose Options

Size
Quart [+$61.27]
Gallon [+$184.29]
PMS Equivalent - Cool Gray 4C

SXT Toners are part of the Rutland Silextreme Silicone Ink series. Mix with the SX0201 SXT Matte Base, SX0515 SXT Catalyst, mix it in and you are ready to print. Mix the catalyst with the RFU White at. 4 to 5% percent by weight of catalyst and mixed well. Use 4% for longer open time, 5% for the shortest flash. The catalyst, is used with the toners at 3-5 % depending upon desired conditions and length of pot life needed. (Longer pot life with less amount of catalyst). SXT Mixed inks print on light and dark cotton, cotton/polyester blends, and 100% polyester (some difficult fabrics may require an underlay with SXT BARRIER BLACK. SXT mixed inks have a high degree of stretch and durability in the wash process. It exhibits an extremely supple hand. A low cure temperature is another plus for this product series.. SXT mixed inks are printable on both manual and automatic printing presses. Unlike other type of inks, SXT inks can be ironed without re-melting the ink film.

 - High wash resistance 
 - Flexible ink film, it won't harden the fabric. 
 - High performance. 
 - Matte finish. 
 - Very good supple print with ability to stretch and regain its original shape. 
 - No PVC, no lead, no phthalates, no formaldehyde, no APEO's 
 - Passes major brand durability testing including 5 x 60 wash test. 

Application 
Prior to printing, one must add up to 5% SX0515 SXT CATALYST to any mixed Color. (only catalyze enough for up to 3 days of print production as the catalyst creates a pot life) Mix the catalyst thoroughly. For maximum opacity and brilliance of the colors, use print - flash - print method.

Note: SXT inks normally require more flash time than plastisol inks. Do not apply to substrates that are dyed with sulfur dyes. Sulfur dyes cause a loss of adhesion. We recommend making the print screen with a double layer of emulsion to provide more ink film on the fabric with the initial print. Difficult fabrics like 100% Polyester, sublimated (camouflage) polyesters,etc. may require the use of SXT BLACK BARRIER as a first down base.



Related Products