pens are great for fixing pinholes on the fly. For touching up pinholes
post-exposure as well as mid printing, they are a breeze to work with compared
to regular liquid blockout and there’s no worry about re applying tape. Touch-up
pinholes at lightning speed with the water soluble green blockout pen.
Typically dries within 30 sec. to 1 ½ min. It is recommended for on or off the
press touch-up or direct stencil systems. Resists plastisol, UV, and most
solvent based inks.
1. To start or increase flow, cover hole
on bulb, squeeze and release quickly.
2. Use sparingly to dry at lightning
3. Wipe tip and recap.
4. Store with tip down.
5. Remove any dry residue from tip
before next use.
HARMFUL, FLAMMABLE, KEEP OUT OF REACH OF CHILDREN.
Acetone (CAS 67-64-1) Ethanol (CAS 64-17-5) MIBK (CAS 108-10-1). Use with
adequate ventilation. Keep away from heat, sparks, and flame. Keep out of
direct sunlight. Do not keep in clothing pockets. Avoid breathing of vapor and
contact with skin. If swallowed, get immediate medical aid. In case of eye
contact, flush with water and get medical aid. For contact with skin wash with
soap and water. For industrial use only. Read SDS (Safety Data Sheet)