TEX-BLUE is a ready-to-use, ultrafast-exposing SBQ-photopolymer emulsion with high solvent resistance. TEX-BLUE is formulated for imprinted sportswear printers with weak light sources to shorten stencil-making time (coating, drying, and exposure). Its 43% solids content helps create a thick build per coat, reducing the number of coats and drying time.
TEX-BLUE is highly resistant to most washup solvents and solvent-based inks, making it very easy to reclaim, either in automatic stencil removal equipment or by hand. Stencils made with TEX-BLUE are extremely wear resistant and will not become tacky under high humidity conditions.NOTE - The product image is intended to show an approximate color of the product when applied to the screen. Actual color may vary. Product listing does not include screen and / or scoop coater.
Photopolymer – These are typically the fastest
exposing emulsions, with many exposing correctly from 30-50 seconds. The shortest times can be seen when using a
newer LED-type exposure unit.
Dual Cure – If you have established a good exposure
time with photopolymer emulsions, you can typically add 90 seconds (1.5
minutes) to that time for most dual cure emulsions.
Diazo - If you have established a good exposure time
with photopolymer emulsions, you can typically add 210 seconds (3.5
minutes) to that time for most diazo emulsions.