Blue color FX88 is an abrasion resistant, general purpose emulsion for use with solvent based poster or enamel inks. Produces stencils with good resolution and definition; good solvent resistance (however, for complete solvent resistance, FX88-SR is recommended). Supplied with high quality powdered diazo sensitizer.NOTE - The product image is intended to show an approximate color of the product when applied to the screen. Actual color may vary. Product listing does not include screen and / or scoop coater.
Emulsion Exposure DifferencesProper screen exposure must take many factors into account –
the emulsion type, coating thickness, exposure unit, etc. As a general guideline for the different emulsion
types (diazo, dual cure, and photopolymer) use these times as a reference.
Photopolymer – These are typically the fastest
exposing emulsions, with many exposing correctly from 30-50 seconds. The shortest times can be seen when using a
newer LED-type exposure unit.
Dual Cure – If you have established a good exposure
time with photopolymer emulsions, you can typically add 90 seconds (1.5
minutes) to that time for most dual cure emulsions.
Diazo - If you have established a good exposure time
with photopolymer emulsions, you can typically add 210 seconds (3.5
minutes) to that time for most diazo emulsions.
These times will depend heavily on your exposure unit and
should only be considered as a starting point.