Direct printing or transfer applications. Stencils: Use any direct emulsion or capillary film. Additives: Glitter Plastisol inks are supplied ready-to-print. Reducer/Detackifier (PLRE-9000) may be added if a thinner consistency is required. Mixing: Makes it possible for the user to make additional glitter colors by using other Heat Stable dry glitter flakes available from Union Ink or your local distributor. For a "Retro" Glossy looking glitter use our PAGE-9030 and up to 1.5 - 2 lbs. of dry glitter flake per gallon. For more sparkle and a matte or dry look use our PAGE-9032 and up to 1.5 - 2 lbs. of dry glitter flake per gallon. Printing Instructions: As recommended, mesh counts higher than 40 (15 metric) should not be used as this will limit the ink's ability to flow onto the garment and will result in a very spotty, irregular finish. Curing Instructions: These inks will cure at 300° F (149° C). Because of the reflective nature of this ink, it requires a longer curing time and more heat to reach the required temperature than a standard plastisol. Wash-Up: Clean the screens and squeegees with mineral spirits or any Eco-Friendly screen wash designed for plastisol inks.
Caution: Always test this product for curing, adhesion, crocking, opacity, washability, and other specific requirements prior to using in production.