Best uses on light and medium colored shirts, hot-split and cold-peel transfers. 100% Cotton fabrics only. Stencils: Use any direct emulsion or capillary film compatible with plastisol inks. Additives: If reducing the ink's viscosity is necessary, add 3-5% Viscosity Reducer (PLRE-9000) by weight. Do not use any additives when using Ultrasoft for plastisol transfer production. Curing Direct Prints: Ultrasoft inks will fully cure when the entire thickness of the ink deposit reaches 300° F (149° C). Metallic inks are not recommended for transfer application. Curing Heat Transfers: Ultrasoft ink will semi-cure or gel when it reaches 240°- 250°F (115°-121°C).Wash-Up: Clean the screens and squeegees with mineral spirits or any Eco-Friendly screen wash designed for plastisol inks.
Caution: Always test this product for curing, adhesion, crocking, opacity, washability, and other specific requirements before using in production.