Vastex LittleRed X3D (Dual Zone) Series Dryer - 30" Width - 8,700w

| Item Question? Ask here!

Your Price: $6,755.00

Not available for sale online - please call for inquiry

Part Number:VAS-LR-X3D-30-240

Crating Fee (required)

Description
Customer Reviews
Payment Calculator

Request Freight Quote

The multi-purpose LittleRed® X3-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs.

Available in 30, 54 and 78 in. (76, 137, and 198 cm) belt widths, it features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149°C) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.

The Little Red X3-D-30 model is equipped with a 30 in. (76.2 cm) wide conveyor belt and three 24 in. (61 cm) wide infrared heaters (8900W @ 240V total wattage) and can cure 360+ plastisol-printed garments/h, 185+ water-based or discharge-printed garments/h, and up to 51+ garments/h inkjet printed with digital white ink at 3 minutes dwell time.

The 54 in. (137 cm) wide LittleRed X3-D-54 model cures 720+ plastisol-printed garments/h, 370+ water-based or discharge-printed garments/h, and 103+ garments/h inkjet printed with digital white ink or pretreated for DTG printing at 3 minutes dwell time.

The 78 in. (198 cm) wide LittleRed X3-D-78 model accommodates up to three rows of garments, and cures a whopping 1080+ plastisol-printed garments/h, 555+ water-based or discharge-printed garments/h, and 155+ garments/h inkjet printed with digital white ink or pretreated for DTG printing at 3 minutes dwell time.

The X3-D-30 and X3-D-54 models have an overall conveyor belt length of 88 in. (224 cm) long while the X3-D-78 model has an overall length of 102 in. (260 cm). The heating chamber for all three models is 41 in. (104 cm) long and features a powerful, targeted exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as cool the skin and controls.

With a second X3 chamber, the LR-X3D-30-2 and LR-X3D-54-2 can handle higher production including longer times necessary for Kornit printers. A crating fee of $250 is required for this product.

FLEXIBLE
Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time

POWERFUL

LittleRed X3D-30 has 8,900[email protected] total wattage
LittleRed X3D-54 has 17,800[email protected] total wattage
LittleRed X3D-78 has 26,700[email protected] total wattage

DEPENDABLE
Industry-leading 15-year heater warranty

EFFICIENT
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing

FAST
- LittleRed X3D-30
360+ garments/hr for plastisol inks, 185+ garments/hr for water-based or discharge inks, 51+ garments/hr for DTG digital white ink @ 3 minutes, 61+ garments/hr @ 2.5 minutes

- LittleRed X3D-54
720+ garments/hr for plastisol inks, 370+ garments/hr for water-based or discharge inks, 123+ garments/hr for DTG digital white ink @ 3 minutes, 103+ garments/hr @ 2.5 minutes

- LittleRed X3D-78
1080+ garments/hr for plastisol inks, 555+ garments/hr for water-based or discharge inks, 185+ garments/hr for DTG digital white ink @ 3 minutes, 155+ garments/hr @ 2.5 minutes

CONSISTENT
Low friction belt aligner and DC belt speed control with digital display

HEAVY DUTY
"X-Series" Conveyor Belt Roller Tracking System with Teflon coated fiberglass belt and HD belt motor

ACCURATE
Dual digital PID Temperature controller is accurate to +/-1°F

ADJUSTABLE
2 - 7 in. (5 - 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater

EXPANDABLE
Add additional chambers and belt extensions

OPTIONS

Additional heating chambers and conveyor belt extensions
Locking casters for mobility
Creeper gear